Breaking-in The Glove

There are as many different methods to breaking-in a glove. Some ideas that we at CoachTeeBall.com have heard of are quite outlandish. However, the easiest and most effect method we have come across is from Rawlings.

Rawlings' "master glove designer" recommends:

1. Press a small amount of shaving cream with lanoline on a clean, dry cloth and carefully work the cream around the outer shell, palm, and back. A light coating is all that is necessary. This will lubricate the leather fibers.
2. Allow the cream to dry thoroughly for 12 to 24 hours.
3. Wipe off the glove and play catch for 10-15 minutes, or 50 to 70 throws. This stretches and conforms the glove to your hand and speeds the break-in process
4. Position a ball in the pocket and tie the glove closed for a few days with a string or rubber band around the outer perimeter. An option is to use the new Rawlings "Mit Kit", which is designed to quickly form the 'ideal' pocket. It includes a double-ended pocket form with a large sphere on one end and a smaller sphere on the other, to form the pocket and the web area simultaneously, and a wide elastic 'figure 8' to hold the glove firmly around the form.
5. As the glove starts to break in, pour a small amount of 'Glovolium' on a clean, dry cloth, and carefully work the oil around the outer shell, palm, and back. A light coating is all that's needed.
6. Allow the glove to dry thoroughly for 24 hours so the oil has time to penetrate and condition the leather.
7. Store the glove in a cool, dry place with a ball in the pocket, or a Mit Kit when not in use.
8. Lace will stretch with use. Keep laces taut but do not overtighten. Check for replacement if necessary after each season.
9. Do not over oil your glove! Twice a season is sufficient!
   

www.CoachTeeBall.com

www.CoachYouthSports.com